The Detailing Syndicate

The interior of your car can become a mess seemingly overnight, and even if you have been consistent in its cleanliness, a thorough detailing is advised to maintain its upkeep. Car cleaning from the inside out is best served by performing tasks from the ground up. The most successful way to accomplish this is to remove as many loose items as you can in the vehicle. It goes without saying trash should be eradicated, but it is also wise to take out the car mats and any additional accessories.

“Similar to your dashboard and center console, it is smart to clean your windows before getting to the seats, as before, spray the window cleaner into a sheepskin cloth or soft towel… make sure you do not use the same detergent on your windows as you do on the vinyl”

Vacuum, Vacuum, Vacuum

Using a Shop Vac or similar device, vacuum as many surfaces as you can as meticulously as possible. Pay special attention to the areas in between the seats and cracks on the dashboard. It is even advised to vacuum the roof of the car if you have the means. Outside of the automobile, vacuum the car mats as well, regardless of if they are plastic or carpet.

Clean Dashboard, Steering Wheel, And Center Console

Using a microfiber towel, wipe each surface after vacuuming to gather up the remaining dust and particles you may have missed. On the clean side of the towel, spray car interior cleaner and rub each section generously one at a time. Shampooing your car seats is generally recommended after the fact to pick up the excess cleaner in case it has been sprayed erratically. You’ll know the vinyl is healthy and

clean when you cannot feel the cleaner on your finger after it has dried.

Spray Your Windows

Similar to your dashboard and center console, it is smart to clean your windows before getting to the seats. As before, spray the window cleaner into a sheepskin cloth or soft towel. Make sure you do not use the same detergent on your windows as you do on the vinyl. Using medium force, rub in the same direction to avoid streaking. After you have cleared the window and it is sparkling, put your finger under a towel and trace the outline of the window to remove any leftover chemicals.

Shampoo Or Wipe Your Seats

Depending on what your seats are made of, you are going to want to use a shampoo specifically designed for interiors, or vehicle grade upholstery cleaner. Some shampoos work just fine on upholstery as well, so make sure you check the directions. Place the foam in a bucket and apply water slowly in a gradual fashion. Using a brush, cover it in entirely with foam. The foam is far more important than the liquid because it is what will clean the seats efficiently. Scrub each seat top to bottom, going over stains more than once if necessary. It is important to note that as you are cleaning, wipe off the leftover moisture with a terry cloth towel. No matter what your seats are made of, do not overly soak them. Outside your vehicle, scrub the car mats as well, and replace them inside after they have dried. To dry out the interior, use a fan or leave the windows down in a cool, dry place. By now you will be left with a sleek looking

cabin that smells incredible.

Conclusion

Though car detailing can be done yourself, it is a very time consuming exercise that merits the use of professionals. These experts will service the interior one section at a time and deliver showroom

quality and preserve its condition for years if done at regular intervals.

There are numerous reasons cleaning the vinyl dashboard in your car is recommended, whether it be for increasing its value or just visually improving its aesthetic. The amount of force and type of cleaners used matter greatly so you do not do more harm than good when it is all said and done.

Have The Proper Tools

While wiping a tissue over vinyl may clear the surface initially, this will provide zero protection and not help in restoration either. Having the right pieces to help you along will make the process worthwhile. Having a low suction vacuum is recommended, but not a deal breaker. Some dashboards are more awkward in their shape than others, so a solid vacuum is effective. In addition, it is always a good idea to have a few microfiber towels on hand. Not only are these great for applying cleaners, they are soft and very forgiving on these surfaces. Finally, having the right ingredients in your vinyl cleaner is crucial. You always want to avoid brands that use alcohols or anything petroleum based, as they will leave a greasy residue even after it has been rubbed in.

“Spraying a dashboard directly will create unwanted streaks, as well as have the mist end up on your windows, center console and steering wheel… these chemicals will make these additional areas harder to clean later”

Vacuum The Vinyl

Using either a Shop Vac or Dustbuster, vacuum the vinyl on your dashboard to get rid of the dust and dirt that has accumulated. This is especially important in areas where they vinyl is wrapped and there

are cracks and crevices present.

Never Spray Directly On The Dashboard

When you feel the surface is clean enough to wipe cleaner onto, spray or apply the substance to a microfiber towel. Spraying a dashboard directly will create unwanted streaks, as well as have the mist end up on your windows, center console and steering wheel. These chemicals will make these additional areas harder to clean later. When applying medium pressure on the towel, rub in tiny circular sections until all of the vinyl has been addressed. It should begin to appear shiny and be smooth to the touch. After the cleaner of your choice has dried entirely after 20-30 minutes, do a final wipe down of the dash with your towel to promote its healthy finish.

Cleaning On A Budget

If you do not have access to detergent, a vacuum, or a microfiber towel, you can still do a serviceable job for your dashboard until you can let a professional take care of it. Using soapy cool water in a spray bottle can suffice if handled carefully. If you have the choice between a cloth or paper towels for wiping, the cloth is typically recommended. The more abrasive the applicator, the less successful the process will be. If you come across deeply embedded dirt, a soft bristled toothbrush can lift up the debris efficiently.

Conclusion

No matter how much time you spend on the interior of your vehicle, professional car detailers are the most foolproof plan to protect and restore your vinyl. Mixing their ingenuity and knowledge in conjunction with technique, they can make any dashboard look as if it is brand new. Additionally, these pros are experts at spotting potential vinyl cracking problems and solving them before they become an issue.

Car seats can acquire filth and deep stains over time that need to be eradicated to eliminate foul odors and positively change a less than appealing interior. Shampooing them is a cumbersome but worthwhile process that takes some time and patience. What your seats are made out of will help you decide what chemicals you will use, but foams and cleaners can typically be used on most upholstery. The cardinal sin you can do when you shampoo is to use a cleaner that is not designed for seats. These detergents can embed in the fabric and not wash them completely, if all all.

“Shampooing seats without vacuuming them will only trap the dirt, and when moisture comes into contact with dust it will make a runny, dark discharge”

Less Is More In A Foam Filled Bucket

Apply the foam or cleaner into a bucket and add water in small amounts at a time. Most people who have never shampooed their seats before frequently make the mistake of putting in too much liquid. The gel and foamy suds are what you really want to work with.

Vacuum Anywhere You Plan To Wash

In truth, the whole interior of the car should be vacuumed freely before a shampooing, but if nothing else get deep into the cracks and in between the seats. Shampooing seats without vacuuming them will

only trap the dirt, and when moisture comes into contact with dust it will make a runny, dark discharge.

Use The Most Effective Tools

Bristled brushes are highly recommended for shampooing because they respond positively to a myriad of fabrics. They are also better at getting to the root of the material and wiping foreign debris. If you

have leather seats, a microfiber towel is especially important because residue will build up and need to be wiped cleanly. Fabric seats necessitate a terry cloth towel, that has the ability to absorb liquid quickly.

Foam With Circular Motions

When you place the foam or gel on your brush, skim the top in the bucket as if you are combing it. Too much liquid will spread the dirt on seats instead of lift it. Start with minimal foam, and use more the deeper the stain. Rub in circular motions, unless creases force you to wipe in long strokes. If you are dealing with stubborn stains, go over the same spot numerous times. If it is still not coming out, go through the drying process and begin again, as the dry particles may flake and be easier to rub off another time through.

Dry With Towels And Fans

Soaking excess water should be done with a terry cloth as you go. Even if the seats do not feel damp after the foam application, at worst air dry them with the windows down. A strategically placed fan

is a good idea to make sure spots like where you sit do not soak like a sponge.

Conclusion

Shampooing car seats is not something that should be done in a matter of minutes if you are truly seeking to make them smell and appear brand new. Professional car detailers have the ability to go section by section and restore them to match dealership quality. With precision and attention to detail, no matter what the upholstery, each seat can be bolstered greatly by the proper technician and cleaners.

Car paint does not just embody the appearance of your vehicle, it is also very important to promoting the longevity of the exterior as well. Each paint job is tough when it is first applied, but over time it can deteriorate just as much as any other area. There are certain steps automobile owners can take to guarantee that the finish is protected to the best of your abilities.

“While polishing a car is certainly merited, it would behoove you to decipher the difference between this action and waxing. Polishing is worthwhile in eradicating minor scuffs and scratches, but it will not generate a protective layer over the paint itself. This process is done through meticulous waxing, which is a sealant that traps positive detergents and cleaners underneath a thin layer of film”

Car Detailing Clay Begins The Process

Detailing clay for vehicles is a terrific tool to start the protection process for car paint. This substance, when rubbed evenly with a liberal amount of force, removes foreign components that do not bond well with paint. The reason why its usage is so rewarding is because it delves deep into the finish to literally ‘clean’ the paint from the inside out. It is also easy to apply and relatively inexpensive to acquire.

Regularly Rinse The Surface

It is vital to understand that paint can be corrupted by several outside forces, with the sun’s UV rays and aerial contaminants being most prominent. Because of this, having a solid defense to combat them is necessary. If nothing else, washing your car routinely will help the integrity of the paint. Not all of us have the luxury or budget to apply cleaners and detergents, but even a simple rinsing with the garden hose can suffice in a bind. Dust and debris adversely affect a car’s finish because it disrupts the bond of the paint.

Store In A Covered Area

It cannot be measured how advantageous it is to have your ride parked in a covered or shaded space. Being out of the sunlight and inclement weather like excessive moisture can add years of life to your paint job. Even though the surface of cars is resistant to water, and to a lesser extent UV rays, it does not mean it is an impenetrable force. These rays from the sun are just as damaging to a painted body as they are to human skin. It causes paint to flake and brown out, as you often see on vehicles in junkyards that are constantly exposed outdoors. Though a covered area only works so long, it is a solid

start if you want to protect the paint initially.

Wax Over Polish

While polishing a car is certainly merited, it would behoove you to decipher the difference between this action and waxing. Polishing is worthwhile in eradicating minor scuffs and scratches, but it will not

generate a protective layer over the paint itself. This process is done through meticulous waxing, which is a sealant that traps positive detergents and cleaners underneath a thin layer of film.

Conclusion

The truth of the matter is there is no perfect way to protect car paint, however utilizing the expertise of professional detailers will increase the number of years it remains intact dramatically. Through style, technique, and access to the best chemicals developed for cars on the planet, these professionals take care of business in a precise and thorough manner.

Car wax is the most vital layer on your vehicle to maintain its integrity and repel the sun’s rays, and as such it is a process that should be done routinely to ensure the elements do not wear out its structure. Because the amount of wax used and the techniques put into motion when applied vary, it is confusing and frustrating for car owners to know just how long each coat lasts. There are numerous factors at play in determining how long a car wax is good for, and a few of them include:

“Some high grade synthetics can work their magic for 6 months to a year, but they come with plenty of caveats… for wax to have positive effects for such a long time period, the age of the paint job and how often the car has been washed are pertinent”

How Your Car Is Stored

Wax reaches its full potential when an automobile is in a garage or in the shade, shielding it from inclement weather. Besides things like rain, the exposure just sitting outside limits how long a wax can last. If your last waxing was applied correctly, it should be able to do its job for a few months.

Synthetic Vs. Carnauba Wax

The type of your wax is also integral in its longevity. Synthetic polymers last much longer than carnauba wax because they seal more effectively. They only use man made ingredients which is why they promote a high gloss finish. Carnauba is natural and is more reflective. The components in carnauba are more susceptible to UV rays and should be reapplied every month or two.

Some high grade synthetics can work their magic for 6 months to a year, but they come with plenty of caveats. For wax to have positive effects for such a long time period, the age of the paint job and how often the car has been washed are pertinent. It seems counter-intuitive that the number of washes a vehicle goes through correlates to a wax’s life cycle, but even though they will make your car sparkle, each time will deteriorate the layer you previously applied.

How The Waxing Was Conducted

Using your hand as opposed to a random motion orbiter or a similar machine will directly impact how long wax will be efficient. Even if you are steady and thorough in your rubbing techniques, wax is unpredictable because it is difficult to spread evenly. Incorporating a machine to cover a car can buy you about 4 months on average before it is time to address the problem again.

Use The Eye Test

Car wax is still doing its job if you can visually see rain or moisture bead up on the exterior of your vehicle. Water should roll off of your car effortlessly, instead of looking like you just drove out of a car wash. If you begin to notice that liquid is taking longer to dry than normal or it doesn’t evaporate entirely, that means it is a good time to have a fresh coat applied.

Conclusion

Even if you have high end wax currently on your automobile, it is recommended to get a fresh coat every 1 to 2 months. Not only does this keep the body’s beautiful reflection, it also hardens and creates a solid layer to ward off contaminants. To get the perfect waxing, professional car detailers represent the most intelligent choice to select the proper type of wax for your specific model and distribute it flawlessly when applied.

The paint job on vehicles serve as not just the aesthetic of our ride, but an extension of each driver’s personality as well. More importantly, the protection of paint is integral to maintaining the health of the body. All too often, a car’s finish is left by the wayside, allowing the automobile to deteriorate far faster than it has to. Keeping paint work sparkling is advantageous to both its appearance and the consistency of the structure as well. So what is the best way to accomplish a flawless shine?

“Car detailing clay is a terrific tool to have in your back pocket and works wonders in promoting a glowing shine. Glide a bar of clay over the body of the vehicle, being sure to pay special attention to areas that are nicked and scratched. The use of clay is terrific for paint because it removes contaminants that can compromise its integrity over time”

Step 1 – Wash Carefully

Most people think a car wash is the first, last and only way to make paint stand out. Nothing could be further from the truth, as a clean car is essentially just a band-aid in the process. Still, its importance cannot be measured, because a thorough rinsing prepares the vehicle for a complete detailing. Using either a pressure washer or soap and sponge, clear any debris that is circumventing your paint from being exposed.

Step 2 – Use Car Detailing Clay

Car detailing clay is a terrific tool to have in your back pocket and works wonders in promoting a glowing shine. Glide a bar of clay over the body of the vehicle, being sure to pay special attention to areas that are nicked and scratched. The use of clay is terrific for paint because it removes contaminants that can compromise its integrity over time.

Step 3 – Systematically Polish By Section

Polishing your car by section; which means rubbing in small areas one spot at a time, will begin to bring a gloss to your paint as well as get the surface ready for wax. Wax is the bread and butter of the operation, because it encases all the work you have done on the body. That said, a solid polish is a task you do not want to skip over. Polishing is a fruitful endeavor because it eliminates problems that an extensive wash can’t even penetrate, such as grease stains and scrapes. No matter how strong your pressure washer is, no amount of water in the world can solve a deep scratch. Polish on the other hand is effective at buffing out problematic regions and making a finish look uniform. But how does this make a paint job shine?

Step 4 – Seal, Shimmer, And Shine!

Polishing allows applying car wax to add reflective properties to your car. This is exactly what owners want because the wax makes each surface respond better to the sun’s light. Incorporate car wax slowly into your clear coat the same as you performed your polish. The wax will start to bond with the paint and create a solid seal to protect it from outside forces. More pertinent to its appearance however, a good wax will allow you to see your reflection in the paint, signaling to you that significant restoration has taken place.

Conclusion

Maximizing the sleek first impression and longevity of a paint job is best left to professional detailers who can use their training to help your particular make and model. Every paint finish is different, and requires a focused, experienced hand to deliver a new level of brightness on your finish. Reach out to our Las Vegas, NV, team to discover how we can swiftly take you vehicle aesthetics to the next level.

Car detailers are one of the most misunderstood, and underused professions available to vehicle owners. A large group of people assume the job is nothing more than basic washing and waxing on a particular automobile. The truth of the matter is that these professionals are experts at their craft in delivering efficient, quality work on cars in a swift amount of time. Moreover, detailers often save customers money over time by performing tasks that make cars last longer and require less maintenance in the future. But what exactly do these experts do?

“Detailers are essentially car beauticians, focusing their effort on restoration and resilience of the automobile. This is accomplished by them undertaking worthwhile exercises like polishing and waxing, in addition to a multitude of others”

Inspection

Undertaking a thorough inspection of every vehicle they come across is in a detailer’s DNA. This means meticulously addressing the issues raised by the owner, while additionally searching for potential problems on their own. This is not a ‘one size fits all’ type of duty, as every make and model requires a specific regiment to that one automobile. If nothing else, detailers provide a different set of eyes to evaluate what your car may need and why.

Cleaning With Confidence

We have all done the gas station cleaning, throwing away everything under our seats and giving the vehicle’s body a generic spray. Professionals at dealerships handle this process with a completely different set of rules and standards. Things like shampooing carpets, restoring upholstery, applying a waterless car wash, and improving your finish are all things that cannot be accomplished at their best without help. Using an approach that is precise and thorough, detailers use a system to treat each ride with the same amount of respect and attention they give their own.

Make Your Engine Purr

The heart of your car, engines need maintenance just as much as the parts on the exterior. Pros examine, fix, clean, and sometimes even shampoo them, all in an effort to make your driving as smooth as possible. Even if you are well versed on their inner workings, detailers have access to the cleaners, solvents, and tools to make engines run with a renewed level of power.

Maintain The Finish

Detailers are essentially car beauticians, focusing their effort on restoration and resilience of the automobile. This is accomplished by them undertaking worthwhile exercises like polishing and waxing, in addition to a multitude of others. For those that think these can be accomplished successfully on their own, it would behoove them to research just how much value these pros add. Your car is as good as how well you manage it, and it can only make a positive statement at its best. Buffing, rinsing and shining with a trained eye can make vehicles look fresh off the lot.

Conclusion

Besides their expertise, detailers do far more than flex their automotive muscle. They educate customers in a helpful, understanding matter, and assist needs with recommendations. In short, they are the bridge between a standard vehicle, and one that has maximized its potential. The art of detailing is like putting your car’s aesthetics and maintenance on steroids. Moreover, with mobile teams like ours, there is not need for you to a dealership to get your vehicle detailed. Simply give us a call and we’ll come to you!

We all have seen the illustrious shimmer and reflective shine after car wax has been applied, but what is the science behind how they work? For starters, it should be mentioned that waxes are not successful unless the vehicle has been thoroughly rinsed and washed first. Polishing is also advantageous for waxes to perform their duty, but it is not an absolute that this task is done beforehand. A debris-free, polished car allows wax to make a ‘clean seal,’ meaning that everything that it encases are positive chemicals and properties. But what does this paste, foam and spray do?

A Shield From Danger

Car waxes work by creating a layer between the clear coat of paint on your vehicle to the elements and outside world. If you have ever felt wax, in any form, the texture is smooth but tough, as it is filled with oils and solvents. Though the ingredients vary greatly, a similar product to compare it to is sunscreen. Sunscreen uses oils and deflective properties to divert sunlight from our bodies. Car waxes work the exact same way, albeit through the incorporation of polymers and carnauba, depending on the brand. Regardless of which type of wax it is, the goal is the same: form a durable barrier to withstand unwanted impurities. These enemies of cars include pollution and the sun’s UV rays, among others.

“Car waxes work by creating a layer between the clear coat of paint on your vehicle to the elements and outside world. If you have ever felt wax, in any form, the texture is smooth but tough, as it is filled with oils and solvents”

What Is Taking Place When Wax Is Rubbed In?

Besides the obvious visual of substance on your hood and body, car wax is bonding with your paint finish to enhance its integrity. A thin film of synthetic polymers or carnauba is ‘setting’ to reflect the sun away from the automobile while promoting the health of its shine. This is the reason why vehicles look wet and mirror-like after its application. Perhaps more importantly, waxing is making the vehicle’s surface hydrophobic, so water and moisture cannot penetrate the exterior. Without getting overly technical, the molecules in wax are non-polar, which is the opposite of water, which harbor asymmetric particles that cling to dirt. The combative polarity between the two is exactly what car owners want, so when water comes into contact with the wax, it has met its match and beads up and rolls off effortlessly.

Fills In The Gaps

Ever wonder why your paint finish looks so incredible after a waxing? The paste or foam that has been spread using an applicator pad is actually revitalizing the body by filling in imperfections and minor scratches. Essentially it is making the paint appear at its best, given the current condition it is in. This is why numerous thin layers of waxing is encouraged, because it is providing a more meticulous cover for the impurities every vehicle comes across eventually.

Conclusion

A final word of caution about waxing is there is, in fact, a wrong way of using it. Too much wax will actually damage the finish, especially if it has been buffed too hard. This has the opposite intended effect, as it will gray out the paint and cause it to fade. Because of this, it is wise to let professional auto detailers in Billings – MT work their magic and deliver a waxing you and your vehicle deserve.

If having your car freshly waxed is your endgame, be prepared to put in the time to do it properly, as multiple steps need to be taken before you apply the liquid or foam. So how can you wax your car from home successfully?

Pressure Wash The Exterior

A simple garden hose will suffice, but using a pressure washer to pre-soak your vehicle is recommended. The reason for this is because the power from these machines will be twice as effective at removing bugs and surface level dirt. Plenty of hoses can handle this, but since you will be waxing eventually, it is going to take you a longer period of time to spray because the body needs to be debris-free.

“Polishing your car will get rid of things like scratching and greasy patches that using water will never be able to solve. Why is this important? Because wax is a sealant, if the surface is not completely smooth, it will literally trap the unwanted components under a layer of film”

Polish Your Car

Wait! If you want to wax, why do you need to polish? The reason is simple: a car wash is just for rinsing, not a thorough cleaning. Polishing your car will get rid of things like scratching and greasy patches that using water will never be able to solve. Why is this important? Because wax is a sealant, if the surface is not completely smooth, it will literally trap the unwanted components under a layer of film. This means that you are not protecting your car, but the dirt on it instead. To polish your car effectively, make use of a microfiber cloth, or buffing apparatus. The goal is to make the paint smooth and exposed to fresh air so the wax can bond with it effortlessly.

Cooler Setting Is Preferred

You will know your car is ready for wax when your exterior is free from everything you do not want encased in the product. When you are ready to proceed, put your vehicle in a cool, covered environment, if possible. In extremely hot temperatures, wax dries almost instantly, which is not advantageous because you do not have time to spread it evenly. The result is a disjointed shine, with half of the car reflecting more light than the other. Waxing in sunlight can also leave unwanted residue on the surface, which will completely undo all the work you put in polishing the vehicle.

Choosing The Right Wax

There are plenty of opinionated car owners on this subject, but the science behind each type of wax will let you know the proper fit for you. For starters, if you are waxing with a spray, this is much easier to apply, but it will not last as long. If you only need a temporary fix, this liquid is fast and easy. Cleaner based waxes are the cheapest on the market, and you get what you pay for. They can be worthwhile, but if you apply too much it will disrupt the clear coat on your automobile. Waxes with carnauba in them are more forgiving to a car’s exterior, and will create a solid barrier to withstand damage from the elements.

Wax By Section

Using an applicator pad, rub in the wax by section on your car. Breaking your vehicle down to smaller areas will make sure you are more controlled in how much wax you are applying overall. It also makes how you disperse it more even. Once the entire car has been serviced, wait the allotted time the wax manufacturer recommends, then use a microfiber towel to wipe away any excess residue that built up too much in a particular region. Voila! A fresh, shiny, and most importantly protected car, is your result.

Conclusion

Waxing is integral to car maintenance, but being uninformed in its application can ruin the primer on your body as well as eventually the paint job’s integrity. Because of this, using an experienced auto detailer is in your best interest to make sure your wax job is long lasting and efficient. Get in touch with our dedicated team of professionals in St. Louis, MO to learn more about how a professional detail can benefit your vehicle.

Waxing and polishing your vehicle is one of the most fun exercises owners can undertake with their ride because the results are noticeable and provide instant gratification. That being said, to complete each task successfully, you ought to allot ample time for the cleaners and chemicals to do as they are supposed to. Rushing a polish, and particularly a waxing, will actually result in damage because you could be adversely affecting the primer. So how do you apply a wax and polish that leaves your car looking amazing?

Rinse With Warm Water

Using a detergent that is approved for automobiles, apply it using a giant sponge so the suds build up. Soapy cleaners are recommended because they help loosen up dust and pollution that has made a home on your car’s body. Using warm water, rinse off each section thoroughly, starting from the top on down to the wheels. This will make sure chemical residue that remains is at a minimum. The main goal of a wash in preparing it for a polishing is to get rid of the components that do not make the surface area smooth. Things like bugs or sand are good examples of this.

“Placing wax on the body is an enjoyable experience because you will begin to see a mirror-like reflection that looks healthy and strong… The wax will encase the positive properties of the polish you applied in a thin film that is durable and UV resistant”

Shade Is Your Friend For Polish And Waxing

Since you are going to want an area removed from the sun for waxing anyway, place your vehicle in a covered or shade filled area. This is far more important than you may realize, as the sun’s rays will make the compounds dry too quickly. The result is a dull finish with uneven texture and light reflection.

Picking The Right Pad

Before you polish, you need to choose the right applicator pad. The reason why this matters is because the darker your paint job is, the more noticeable swirling lines are. Always remember that a softer pad will be needed for these vehicles.

Keep The Pad Damp With Polish And Wipe By Section

When you apply your polish to the pad, make sure enough is on there that at minimum there are no dry spots. Dry areas on an applicator burn the clear coating on your vehicle. Next, by dividing your car into manageable sections, wipe the polish in a circular fashion. This can also be done with a buffer, however do not press too hard to the finish. At first the polish will smear and appear cloudy, but once it starts to dissipate and the paint appears brighter, it is time to move to the next area.

Seal Your Efforts

Placing wax on the body is an enjoyable experience because you will begin to see a mirror-like reflection that looks healthy and strong. Using a different applicator pad than the polish, use a high grade wax and rub it in by section, just as you did previously. Make sure every inch of the car is serviced. The wax will encase the positive properties of the polish you applied in a thin film that is durable and UV resistant. After the wax has dried, it is time to clean up any leftover residue. You will know the wax is dry if you rub your finger over it and it does not smear. Using a microfiber towel, carefully swipe the surface until the entire vehicle looks as if it is glowing.

Conclusion

Polishing and waxing a car is one of the most valuable projects you can do for its sticker price and appearance, and as such, should be left to auto detailing professionals who are knowledgeable and effective in its craft. With the right experts in Kansas City, MO, handling both of these processes, your automobile’s value will spike exponentially.